Pool Resurfacing Cost in Randburg: What an Old Marbelite Pool Really Costs

The pool resurfacing cost Randburg homeowners should plan for on an old marbelite pool is about R18,000 for a 6x4m pool. That is one overall price, and the job takes three to five days from drain to refill. Larger or more awkward pools cost more, and a written quote follows a site inspection.

That headline number is the easy part. What catches people out is a set of assumptions about what the price covers, when the work is due and why quotes differ. The sections below deal with those assumptions one at a time.

Pool resurfacing cost Randburg: what does R18,000 cover?

The R18,000 covers the whole job, from the moment the water comes out to the moment the pool is refilled and balanced. Trademen Pools does not quote a resurfacing figure and then add extras once the work starts. Major jobs like a remarbelite carry one overall price.

The work runs in this order:

  1. Drain the pool and protect the surrounding paving and coping.
  2. Chip the old marbelite back to a sound, keyed base.
  3. Patch any cracks, hollow spots or chips found underneath.
  4. Apply the new marbelite across the shell.
  5. Leave the finish to cure overnight.
  6. Refill the pool and bring the water chemistry into range.

Minor changes belong inside that same price. If your filter sand needs replacing or the pool light needs changing while the pool is empty, the team folds it into the job. You do not get a second invoice for it.

The price is for a 6x4m pool. A 10x5m pool has more surface, so it costs more, and the exact figure depends on size and the condition the shell is in. Any honest contractor will say the same. Be wary of a number quoted over the phone for a pool nobody has seen.

Does an old marbelite pool always need a full remarbelite?

No. A pool that still holds water and feels smooth underfoot can often run another season. The real question is whether the surface has started to fail, because that decides whether you are paying R18,000 now or next year.

Marbelite is a cement-and-marble-aggregate plaster. Pool chemicals and years of sun slowly strip its surface layer, and the aggregate underneath starts to show. Look for these signs appearing together:

  • A gritty, sandy feel on the steps and floor instead of a smooth finish.
  • Patchy or faded colour.
  • Fine hairline cracks.
  • Stains that no longer lift with an acid wash.
  • Rising chemical use just to keep the water clear.

The last sign tells you the most. Once the surface turns porous, it holds algae and stains far more easily. At that point the plaster is the problem, not your water treatment. Marbelite generally needs renewing somewhere between 7 and 15 years in, depending on how well the pool was built and looked after. Pools ten years old or more are the ones most often due.

Leaving it too long costs money. A porous surface keeps eating chemicals, and cracks under a failing finish are easier to patch early than late.

Why do some remarbelite quotes come in thousands lower?

Usually because something has been skipped, and the usual casualty is the chipping back. It is the step you never see, and it decides whether the job lasts.

New marbelite bonds mechanically to a roughened base. It does not bond chemically to the old finish. If the old plaster is not chipped back to a properly keyed surface, the new coat looks smooth on day one. Within a year or two it can blister or peel because it never had anything to grip. A quote that looks cheaper than it should is often cheaper right here.

The overnight cure is the other place corners get cut. Marbelite is cement-based, and cement needs time to harden before it meets water. Refill too soon and you risk a mottled, uneven finish. Trademen Pools applies the marbelite and leaves it to cure overnight before anything else happens.

Repairs sit in the same category. Plastering over a compromised shell only hides the problem for a while. A proper job patches the cracks and hollow spots first, and that labour is part of the price you pay.

Is a fibreglass refinishing cheaper or better for an old marbelite pool?

It is neither cheaper nor, for most old concrete pools, the better choice. A 6x4m fibreglass refinishing costs about R25,000, against about R18,000 to remarbelite the same pool.

For the extra R7,000 you change the character of the pool as well as the surface. Marbelite gives a classic, matte plaster finish that suits natural stone and warmer, more traditional exteriors. It also gives you a solid structure and keeps custom shapes and details intact. Fibreglass gives a smoother surface with a slight sheen, which suits cleaner, more contemporary lines.

If your pool already sits in a garden with stone paving and a traditional look, remarbeliting keeps it that way for less money. Marbelite is the finish Trademen Pools backs for most older Randburg pools. If you want the smoother, modern look, ask for a fibreglass refinishing quote alongside the marbelite one and compare them on the day.

For context on what a new pool costs, a 6x4m marbelite build runs about R78,000. Independent South African pool price guides put fibreglass pools anywhere from R82,500 to R165,000. Renewing the finish on a sound shell costs a fraction of that.

What should you check before you accept a quote?

Check that the quote covers the whole job at one price, and ask what happens if the shell turns out worse than it looks. Then check the guarantee. Remarbelite from Trademen Pools carries a five-year guarantee, and the team honours it for normal wear. It does not cover damage from natural causes such as weather, or from interference such as someone walking on the finish while it cures.

Run through this list with any contractor:

  • Is the price one overall figure, with minor jobs like a light or sand change included?
  • Will the old marbelite be chipped back to a keyed surface?
  • Are cracks and hollow spots patched before new plaster goes on?
  • Does the finish cure overnight before the pool is refilled?
  • Is the guarantee in writing, with its exclusions stated?
  • Does the same team do the work, or does it go to a subcontractor?

The last point matters more than people expect. Trademen Pools handles everything in-house, so the people who inspect the pool are the people who resurface it. A maintenance contract is available afterwards if you would rather not manage the chemistry yourself.

Remember this: the lowest quote and the cheapest remarbelite are rarely the same thing, so compare what is chipped, patched and cured before you compare the rand figure.

Get a written price for your Randburg marbelite pool

R18,000 is the figure for a 6x4m pool, but your own price depends on size and the condition of the shell. Send us the details and we will inspect the pool, then give you one overall written quote with no extras added later.

Leave a Comment

Your email address will not be published. Required fields are marked *