Which feature suits a modern pool, and when do you have to choose it? For a modern home the answer is usually a weir, and you choose it before the concrete is poured. Custom water features Northriding owners ask about are easy to sketch and hard to add late, because the fittings and plumbing sit inside the shell.
This piece gives an honest view from the build side. It covers what each feature does, what it adds to your plumbing and pump, and where a feature stops being worth the money.
Which water feature suits a modern home?
A weir suits clean, contemporary lines best. A cascade or spout suits a pool you want to hear as well as see. A shallow reflecting surface suits a pool you mostly look at. Many modern homes have straight edges and large glass, so moving water should echo those lines instead of fighting them.
Water features for Northriding pools fall into three groups, and each one trades something for what it gives you.
Weirs
A weir is a continuous overflow edge. Water slides over a level lip in a thin sheet, and the pool reads as larger and calmer than its actual size.
- For: it gives the cleanest modern look and a quiet, steady sound.
- Against: the lip has to be dead level, so a Northriding pool weir needs careful setting-out, and it adds flow demand to the pump.
Cascades and spouts
A pool cascade and spout adds movement and sound. The splash can mask background noise, and it turns a plain rectangle into a feature people stop and look at.
- For: they bring the most sound and the most visible movement for the space they use.
- Against: they need extra plumbing runs, and a stepped cascade takes more design thought than a spout.
Reflecting pools and shallow water walls
A reflecting pool is a shallow, wide surface, often only a few hundred millimetres deep. You look at it from the lounge more than you swim in it. A shallow water wall can sit against a boundary wall and do the visual work of a much larger feature.
- For: strong visual impact from indoors, and it works as a second water body beside a swimming pool.
- Against: you cannot swim in it, so it only makes sense if the view matters to you.
Why do you have to decide before the concrete is poured?
The weir, the aim-flow return and the LED light all go into position while the concrete sets. Nobody can add them cleanly afterwards. For custom water features Northriding clients commission on a new build, the decision therefore starts at the drawing stage.
The order of the build explains why. The crew marks out and squares the site, then digs by hand and/or TLB, depending on access and space. Next it fixes Y8 steel bars and 100mm mesh wire and builds a ring beam. Then it pours 30 MPa ready-mix concrete from a reputable supplier, 150mm thick. While that concrete sets, the crew positions the weir, aim-flow and LED light. The shell then cures for three to five days.
Plan the feature at the drawing stage, and the crew builds it into the shell. Leave it until the pool is finished, and you pay to cut into a cured shell and re-plumb it. Piping matters here too. Marbelite pools get 50mm PVC for suction and return, and a feature changes where those lines run.
Can you add a water feature to an existing pool?
Often yes, but the answer depends on the shell and the plumbing you already have. A weir needs a level lip cut into the shell. A spout needs a new supply line and a pump that can carry it. Someone has to inspect the pool before anyone quotes.
The sensible moment is when the pool is already due for work. A remarbelite is a major job with one overall price, and minor changes sit inside it. If your pool looks tired and you want a feature, ask for both to be planned together. A remarbelite on a 6x4m pool costs about R18,000 and takes three to five days, so the disruption stays short.
What does a water feature add to the plumbing and the price?
It adds pipework and, in some cases, pump capacity. A spout or cascade needs its own supply line. A larger weir moves more water than a plain return does. Both run off the same pump, so the equipment has to suit the feature as well as the pool.
That equipment is the “Box”: a combo unit with the pump, sand filter, electrical distribution board with a battery-backed timer, and a pump house. After the crew installs it, the smaller fittings go in and the wiring for the LED light and the other features runs back to the board. The timer lets you run the feature when you want to enjoy it, instead of all day.
Pool water feature installation costs far less when it sits in the plan than when it becomes a second phase. Trademen Pools gives one overall price for a major job, so a light change or a sand change sits inside that figure and never becomes a separate line. A 6x4m marbelite pool costs around R78,000. The honest answer on the feature itself is that it depends on the type, the length of pipe run and whether the pump has to grow. That is why the written quote follows a look at your actual stand.
Does the pool finish change how a feature looks?
Yes, and it should shape the choice. Marbelite is a classic, matte plaster of white cement and marble aggregate. It suits natural stone and warmer, more traditional exteriors, and moving water over it looks calm and natural. Trademen Pools steers feature pools toward marbelite, because that matte surface lets the water and the lighting do the work.
Fibreglass gives a smoother, more consistent surface with a slight sheen. It suits cleaner contemporary lines. Both finishes go on a concrete shell, so either can carry custom pool water features. The full range of Trademen Pools construction and finishing work covers both. For a side-by-side view, this comparison of fibreglass and marbelite finishes sets out the differences, and The Pool Team’s guide covers similar ground.
Custom water features Northriding owners plan: what will your stand allow?
A contractor walking your garden asks four questions. Where will you see the water from? Where does the Box sit, and how does the equipment reach it? How much room does the feature need beside the pool? Does the drawing show the feature before anyone digs? Your answers decide whether a weir, a spout or a shallow surface belongs on your stand.
Start with sightlines. Stand in the lounge, then at the braai, and note where the pool catches your eye. A weir belongs on the edge you see most. Pick one lead feature instead of three, and decide whether you want sound, a view or a clean edge to match the house.
Access comes next. Crews dig by hand and/or TLB depending on space, and a tight stand changes how materials arrive and spoil leaves. Trademen Pools looks at access, levels and equipment position on the site visit, then writes one quote covering the feature, the Box and the finish. The business also handles council management as part of the build, so the feature goes onto the drawings the council approves. Settle the feature list before then, and the pool is built around it. A pool built this way takes two to three weeks, with the feature already in the shell.
Ready to discuss your custom water feature options? Contact Trademen Pools for a consultation and quote.
Decide on your water feature before the concrete is poured
A weir, cascade or spout is priced into the build from the start, and it has to be set while the shell concrete sets. Tell Trademen Pools about your Northriding site and we will give you one overall price that includes the feature, the plumbing and the pump capacity it needs.